Along with effective gutter and draining systems, a good sump pump is an essential component of a dry basement. But if you’re relying exclusively on an AC sump pump for water removal, you’re always going to be at the mercy of the next power outage, even if you’re using a high end sump pump like the Zoeller M267. Unless you’ve got a generator, this isn’t enough. So what options are on the market for backup systems?

We’ve reviewed most of the backup pumps on the market, and while there are many differences between them, the most important involves the source of power: battery or water. If you want a DC-based backup pump, the best on the market right now is the Wayne WSM3300. But if reliability is more important than speed, you’ll need to leave battery-powered sump pumps behind and move straight to water-based pumps. They aren’t as fast or fancy, but as long as you have water pressure from a municipal line, you’ll be able to pump water out of your basement for decades.

We’ve lately been reviewing a range of water-based pumps, including the Basepump RB 750-EZ, the Basepump RB 750 and the Liberty Pumps SJ10. Today we’ll review the upgraded version of the RB 750, the Basepump HB1000 Water Powered Backup Sump Pump. The key upgrades here are related to maximum water removal rates in gallons per hour. Our full review is below, but if you simply want to know whether to buy it and where, we give it two thumbs up and you can buy it here.

Key Features of the Basepump HB1000 (60 Second Summary)

The Basepump HB1000 is a water-based backup sump pump. It requires no AC or DC power, and instead works through water pressure from a city water line. It can pump up to 1,400 gallons of water per hour (GPH) and includes a 5 year Basepump limited warranty. It’s 16 inches long, 6 inches tall, and 4 inches wide while weighing 5 pounds. The part number is HB1000-D while the model number is HB1000.

The HB1000’s intake is 3/4 inches and you can scale that up to 1 inch or down to 1/2 inch inlets. The discharge size is 1-1/2 inches while the sump intake is 1 inch in diameter. As with the RB 750, you’ll need an inlet supply pressure between 40 PSI and 90 PSI. Two gallons of sump water are pumped with each pumped gallon of city water.

Pumping speed will vary with pumping height and water inlet pressure. The GPH at 40 PSI is 950, which rises to 1,000 GPH at 60 PSI, 1,200 GPH at 80 PSI, and 1,400 PSI at 90 PSI. Max lift is 15 feet, although this will vary with piping configurations and city water pressure.

Like the RB 750 and RB 750-EZ, the HB1000 includes a separate battery-powered high water alarm. The alarm sounds at 85 dB and uses a 9 volt battery, which is included.

How Does the Basepump HB1000 Compare to the RB 750-EZ and RB 750, the Liberty Pumps SJ10 SumpJet, and the Wayne WSM3300?

The primary difference between the HB1000 and the RB series involves pumping speed. The RB 750-EZ also has the advantage of coming with a lot of the accessories you’d need for a successful installation out of the box. The HB1000 and RB 750 will require either sweating copper or buying push-fit pipe fittings to fit them to copper, PEX, or CPVC tubing. Alternatively, you can buy the HB1000-PRO, which is the “EZ” version of the HB1000.  In terms of pumping speed, the max water removal rate of the HB1000 at 1,400 GPH is more than 50% greater than the max rate of the RB 750/EZ.

Compared to the SJ10, the HB1000 still features a greater max pumping speed (1,400 GPH vs 1,188 GPH) but has a narrower range of safe water inlet pressures (40 to 90 PSI vs 20 to 100 PSI). It also comes with a significantly lower max head at 15 feet vs 39 feet. However, the warranty will be significantly longer at 5 years compared to 3 years.

Compared to the WSM3300, the biggest differences involve power sources. With the HB1000, you won’t need any kind of electricity but you will need a municipal water supply. You’ll also get a much longer life due to the inherent design advantages of a water-based pump compared to a battery-dependent sump pump.  You have no moving parts that can break and the design is inherently maintenance free. It’s important to keep in mind, however, that the top pumping rate will be significantly slower at 1,400 GPH vs 3,300 GPH, while the max head will also be slightly lower at 15 feet vs 20 feet.

Our Short and Long Term Experiences Installing and Using the Basepump HB1000

Installing the HB1000 will take about three hours once you have the required components, presuming you have some experience with plumbing. As with Basepump’s other water-based sump pumps, the basic steps are to set the pump up in your basement ceiling, connect your city water line to the pump inlet, your sump pipe to the sump inlet, and the discharge pipe to the sump outlet. To avoid needing to sweat copper, you’ll want to look into buying PEX tubing and SharkBite connectors; they’ll cost a few dollars but will make the job far less technical.

In terms of longevity, you can expect many years of problem free service if your sump pump is like most we’ve seen and heard of from Basepump. In practical terms, this means somewhere between 10 and 20 years of functionality, though you might definitely get more out of yours. As with all water-based sump pumps, the primary risks to longevity are too high water pressure. Your city line needs to deliver no more than 90 PSI; if it delivers under 40, the pump won’t work, but if it delivers more than 90, you’ll break seals and create your own water park in the basement.

Troubleshooting and Installation Tips to Get Your Basepump HB1000 Working Sooner

It’s important to make sure you have enough water pressure from your supply line to power the HB1000. Basepump recommends the bucket test, which involves filling a 5 gallon bucket from an outside spigot (such as one that feeds a garden hose) and timing it. If it takes under 40 seconds to reach the fill line (typically two inches below the brim), you can use the RB750 or EZ. If it takes under 30 seconds, you can use the HB1000/PRO. If it takes under 20 seconds, you can use the CB1500. If you have a frost free spigot, you must reduce your fill times by 25% for accurate results. However, note that if it takes more than 30 seconds to fill the 5 gallon bucket, you won’t be able to use the HB1000/PRO because it won’t receive enough water pressure from the intake line to create the suction effect necessary for sump water removal.

Basepump HB1000 Pros, Cons, and Value Comparison

When it comes to water-based sump pumps, we’re hard pressed to find a faster model under $300 than the HB1000. It’s faster than the entry level RB 750 and RB 750-EZ while maintaining high levels of reliability and maintenance-free use. The main feature we’d like to have would be the inclusion of the accessories necessary for an out-of-the box installation, in order to reduce the need to go shopping for them. However, that’s precisely what the HB1000-PRO is for, so if you want everything you need from the start, you just need to spend a bit more. Whatever you choose, it’s important to remember that when you buy a water-based sump pump, you’re not going to get the fastest pumping speeds on the market out of it; that’s what turbocharged battery-based pumps like the WSM3300 are for. What you get from a quality water-backup pump like the HB1000 is decades of maintenance-free peace of mind, safe in the knowledge that the pump will keep your basement dry as long as you have water pressure. If that’s what you’re looking for, this is a solid choice.

You can buy the Basepump HB1000 here on Amazon. You can buy the Basepump HB1000-PRO here. You can buy the Basepump RB 750-EZ here. You can buy the Basepump RB 750 here. You can buy the Liberty Pumps SJ10 here. You can buy the Wayne WSM3300 here on Amazon. You can buy additional PEX tubing here and SharkBite connectors here. You can buy a silent check valve here.

If you find our work at PumpThatSump helpful, you can put our relentless reviewing of every pump and fixture on the market to the test by shopping via our links above for whatever you need to make your house a home. Despite being self-employed, we promise not to spend it all on health insurance.

If you want to keep your basement dry, you need a sump pump. But experienced homeowners and landlords know that an AC sump pump isn’t enough, even if it’s one as reliable and breathtakingly fast as the Zoeller M267. Unless you’re fortunate enough to have a generator or live somewhere without power outages, you’re also going to need a backup sump pump in your sump pit. So what are your choices?

There are plenty of options out there–we’ve reviewed many of them. But the field basically comes down to DC-based backup pumps and water-based pumps. If you want a DC-powered sump pump, the Wayne WSM3300 is the best on the market. However, if you prize reliability over speed, no battery-powered pump will be good enough; you need a water-based pump. They don’t need electricity, batteries, or anything beyond water pressure from your city water supply. They aren’t as fast as the fastest DC pumps, but the best ones will give you decades of maintenance-free service.

We’ve reviewed some of the best budget water-based backup sump pumps, including the Basepump RB 750 and the Liberty Pumps SJ10. Today we’re going to take a closer look at an upgraded sibling of the RB 750, the Basepump RB 750-EZ Water Powered Backup Sump Pump. It’s more expensive than the RB 750, but it includes a number of additional features to make it far easier to install straight from the box (hence the “EZ” suffix). Our full review is below, but if you’re wondering whether it’s worth it, we sure think so, and you can buy it here.

Key Features of the Basepump RB 750-EZ (60 Second Summary)

The Basepump RB 750-EZ is a water-based backup sump pump. As a result, it doesn’t rely on AC or DC power, but on a constant water pressure from a municipal water source. It can remove up to 900 gallons of water per hour and comes with a 5 year limited warranty courtesy of Basepump. It’s 18 inches long, 6 inches tall, and 4 inches wide; it weighs 6 pounds.

The RB 750-EZ intake is 3/4 inches, with the ability to adapt to 1 inch or 1/2 inch inlets. The discharge is 1-1/2 inches and the sump intake is 1 inch. Inlet supply pressure must fall between 40 PSI and 90 PSI, not exceeding 90 PSI. Two gallons of sump water are removed with every gallon of city water pumped.

Pumping performance depends on water inlet pressure as well as the pumping height. At 40 PSI and 10 feet of lift, the water removal rate is 700 GPH. This rises to 750 GPH at 60 PSI, 800 GPH at 80 PSI, and tops out at 900 GPH at 90 PSI. The max lift is roughly 15 feet, although the precise pumping height will vary with both city water pressure and piping configurations.

Like the RB 750, the RB 750-EZ includes a battery-powered high water alarm. It sounds at 85dB and takes a 9 volt battery.

How Does the Basepump RB 750-EZ Compare to the RB 750, the Liberty Pumps SJ10 SumpJet, and the Wayne WSM3300?

The main differences between the RB 750-EZ and the regular RB-750 involve ease of installation. You can use the built in push-fit pipe-fittings (similar to those sold by Shark-Bite) to connect the EZ to CPVC, PEX, or copper tubing. It also includes a brass shutoff valve, a dual check valve to prevent back flow, a tee, and an adapter. Besides these differences, it will function identically to the RB 750.

Compared to the SJ10, the RB 750-EZ will be easier to install due to coming with nearly all of the components necessary  for a typical installation, but it will also be a slightly slower pump (900 GPH vs 1,188 GPH) with a much narrower range of safe water inlet pressures (40 to 90 PSI instead of 20 to 100 PSI). The max head will also be significantly lower at 15 feet vs 39 feet. however, the Basepump will come with a significantly longer warranty at 5 years vs 3 years.

Compared to the Wayne WSM3300, the biggest difference is that the RB 750-EZ doesn’t depend on electricity of any kind but on a municipal water supply, while the WSM3300 depends on DC power to run and AC power now and then to charge the battery. The RB 750-EZ is also likely to last far longer due to its inherent design as a water-based pump. However, keep in mind that it will be significantly slower (900 GPH vs 3,300 GPH) and will also feature a slightly lower maximum head at 15 feet vs 20 feet.

Our Short and Long Term Experiences Installing and Using the Basepump RB 750-EZ

The RB 750-EZ was designed to be easy to install, and in our books, Basepump succeeded handily. You don’t need to be a professional plumber to install it, and either having some plumbing experience or access to someone who does will likely be enough to get things put together. As with the RB 750 or any other water-based pump, you’ll need to connect the city water line to the pump inlet, the sump pipe to the sump receiving inlet, and the discharge pipe to the pump outlet. Because push-to-fit connectors are already included with the EZ, unlike with the regular RB 750, you’ll need next to no accessories to complete the project in many circumstances. Don’t forget to plan for a drainage pipe or tubing to evacuate pumped water as well as a 1 inch PVC pipe to bring sump water into the pump itself. Installation is likely to take about three hours if you have all of the necessary tools.

The pump is typically mounted to a joist in the basement ceiling before being connected to the city water supply.

Longevity is comparable to that in fellow Basepump water pumps, and you can expect somewhere between 10 and 20 years of functionality, although more years are certainly possible. The biggest risks come from supplying too much water pressure to the pump; make sure your city water pressure falls within the 40 to 90 PSI range and not above 90 PSI. Too little pressure will simply result in a pump that can’t move water, but too much pressure will break seals and lead to leaking.

Troubleshooting and Installation Tips to Get Your Basepump RB 750-EZ Working Sooner

With a pump as reliable as the RB 750-EZ, there’s thankfully not too much to keep in mind in terms of troubleshooting or installation. With that said, it’s important to set up and use the included water alarm so your pump won’t be at risk of turning into a perpetually-running garden hose if a fitting breaks or if the float switch doesn’t shut off once the crock is emptied.

When setting up your water alarm, you’ll want to make sure it’s at a height where it will activate before the sump pump itself does; this will alert you before the sump pump begins to pump water. Similarly, you’ll want to check the pump to make sure it turns itself off once it’s done pumping water. You shouldn’t need to do this every time the pump activates, but it’s a good idea to check immediately after an installation so you can catch any potential problems from the start. Of course, it’s also a good idea to test the RB 750-EZ and whatever main pump you have on a monthly basis. To test the pump, simply disconnect your main sump pump (e.g., by unplugging it) and fill your sump basin until your alarm sounds (which should again be before the pump itself is triggered to operate). The pump should begin pumping water and then stop a few seconds after the float shuts off.

Make sure you don’t remove the vacuum breaker attached to the pump; this is in place specifically to keep water from siphoning upstream into the city water system, which is both against the law and a health hazard to the public. If the vacuum breaker leads to water splashing around your pump and basement, you’ll want to add a vent or air gap somewhere in the discharge pipe to release pressure.

Basepump RB 750-EZ Pros, Cons, and Value Comparison

It’s hard to say anything negative about the Basempump RB 750-EZ. It’s not the cheapest or fastest water-based sump pump on the market, but it’s the best combination of speed, reliability, and ease of installation you’re going to find for under $300 among water backup pumps. Compared to the RB 750, we’re happy to see most of what you’ll need for a successful installation is included right in the box. As with the RB 750, you’re going to enjoy a much greater level of reliability than what you’ll find in battery-operated sump pumps due to the much lower likelihood of losing water pressure compared to that of losing electricity. Remember that water-based sump pumps aren’t built for speed; they’re built to offer decades of maintenance-free peace of mind along with near-guaranteed functionality throughout their lifespans. The RB 750-EZ delivers on both counts in our books.

You can buy the Basepump RB 750-EZ here on Amazon. You can buy the Basepump RB 750 here. You can buy the Liberty Pumps SJ10 here. You can buy the Wayne WSM3300 here on Amazon. You can buy additional PEX tubing here and SharkBite connectors here. You can buy a silent check valve here.

If you find our work at PumpThatSump helpful, you can support our relentless reviewing of every sump pump on the market by shopping via our Amazon link for whatever you need to make your house a home. Despite being self-employed, we promise not to spend it all on health insurance.